US Dollar
You have no items in your shopping cart.

Smart Bus RRS Futaba S-Bus/S Bus2

Manufacturers: Advanced Radio , Booma RC
$379.00 (USD)
Smart Bus for Futaba SBus
+ -

PLEASE SEE Smart bus ARXL product

26 fully assignable and programmable outputs

Looking at that next big project and wondering how you’re going to power all those servos, the RRS system is equipped with 26 fully programmable outputs , all via the single S-Bus output on your Futaba RX. Each channel is freely assignable to any input and can be reversed and matched to any other channel on the Smart Bus. Building that next giant scale model. Smart Bus has got it covered.

Easy to Use

Smart Bus comes with pre configured channel mapping that matches your radio so model setup is really simple. Of course for advanced setups all 26 channels can freely assigned to any transmitter channel.  

SBus2 telemetry ready

Smart Bus RRS gives you live feedback of both your batteries on your radio. Monitor the voltage and capacity used out of each of your batteries at any time during the flight. Ensure your batteries are ready for the next flight.

The Next standard in servo Matching.
In the RC industry precision is key. How can you expect to be precise when no two servos are identical, giving you varied results no matter how well you mechanically match them. Match your servos across 15 individual points, with 8000 step resolution and you can finally achieve matched perfection on your elevators, flaps, multi-engines and more. Take the hassle out of your new setup and have a model that raises your skills.

Sub-trim and reverse on all outputs
Ever spent hours, mechanically matching servos and never being able to get them just right or had to use a separate channel on your receiver, just to reverse a servo. With our intuitive and simple setup you can easily sub-trim at the centre and end-points of all your outputs on the Smart Bus. Using Smart Bus you can individually reverse your servos at a touch of a button. Smart bus gives you ultimate power at your fingertips.

Regulated voltage gives you precise, repeatable, results.

It is hard to be the best with a model that changes. With our high powered 220A regulator FETS we remove the change and give you pure constant regulation. As batteries are used their voltage drops, changes in voltage mean changes in speed and power of your servos. Regulating ensures your model is the same time after time.

RRS - Redundant Receiver technology

Smart Bus RRS is the safest in signal sharing technology, the redundant receiver system ensures your model by utilising two S-Bus/S-Bus2 receivers. unlike other power systems Smart Bus reads signal from both receivers at all times and runs an intelligent algorithm to select the best signal.

In the unlikely event that a receiver fails then Smart Buss switches to the better receiver in less than one signal frame to ensure you will have constant control of your model. Reliability is key with models today, with our redundant receiver system you can ensure your model is always reporting back to you.

With Smart Bus all receiver events are recorded and remain even when powered down so you can review receiver health and signal strength between flights. 

Vibrant colour touch screen display.

Gone are the days of fiddly buttons and rotating dial frustrations, no more bind plugs and small screw drivers needed. The vibrant Smart Display gives you feedback and simple programming all in one touch screen display. With intuitive buttons and a single setup design. Your model will be in the air before you know it.



*Redundant Receiver system – works with dual or single receiver system

*S-Bus2 telemetry ready

*26 fully programmable and assignable channels
* Works with single or dual battery configuration.
* Works with all battery chemistries. LiFe. LiPo, Lion, NiMh, NiCD.
* Full Dual Battery Redundancy - If one battery fails the other battery takes full control..
* Screen 2.4inch diagonal touch screen with 64k colour
* Screen case dimensions 3.4 x 2.0 x 0.5 inches (86 x 50 x 12)mm
* Smart Bus dimensions 4.2 x 3.0 x 0.9 inches (107 x 78 x 23)mm
*Vibrant Colour touch Screen
*Triple regulator design with dual 100A power regulator FETS.
*Multi-match technology.

Download the SmartBus manual from this link


Smart Bus RRS Introduction Video


Smart Bus RRS Power Setup

Smart Bus RRS Binding SBus receivers

Smart Bus RRS Input to Output Routing


Smart Bus Sub Trim and Servo Matching

Customers who bought this item also bought

AR 8444S HV Soft Start High Torque

High Torque Coreless Titanium Geared Servo 40kg designed for the high demands of 3D, precision flying, giant scale and turbine RC hobby
$119.00 (USD)

AR Metal Servo Arm AR/Futaba 1.25 to 1.75 inch (25mm) (44mm)

Light Weight High Strength Servo Arm Futaba 1.25 to 1.5 inch (25mm) to (44mm)
$10.95 (USD)

Pro line 200mm (7.9") Servo Cable

200mm (7.9") Pro Line 20 gauge heavy duty servo cable with sure lock servo connectors.
$5.95 (USD)

Pro Line 600mm (23.6") Servo Cable

600mm (23.6") Pro Line 20 gauge heavy duty servo cable with sure lock servo connectors.
$8.49 (USD)

Pro Line 900mm (35.4") Servo Cable

900mm (35.4") Pro Line 20 gauge heavy duty servo cable with sure lock servo connectors.
$9.95 (USD)

SmoothFlite ARXL ML

26 channel gyro and power expander with sequencer designed for SBUS2, Xbus, HoTT, Jeti, FRSky Sbus and SRXL
$479.00 (USD)